Automatic boiler for wood pellets
Instructions for installation and operation
4.4 CERAMIC PARTS
-
ceramic reflector – is installed on the surface of the burner
-
ceramic extension grate – is installed into the boiler body over the burner furnace
-
ceramic schield – is installed over the door
-
ceramic facing door – is mantled on the door
4.5 FEEDER 1 WITH INDEPENDENT DRIVE (FROM FUEL BIN)
Fuel feeder number 1 consisting of a driven ribbon flight and a tube transport route including the overflow
part.
This feeder is built into the fuel bin under an angle which may not exceed 45°. If the position of the feeder
is more perpendicular, dosing of fuel is not precise.
The feeder has its own drive which is controlled by the control unit.
The feeder is supplied in a standard length equal to 140 cm.
The feeder 1 consists of the following parts:
-
body of the feeder with flanges
-
spiral – chute feeder 1 with an electric motor with a gearbox
-
flexible hose to feeder 2
-
pulse sensor of feeders
4.6 JACKETING OF THE BOILER INCLUDING HEAT INSULATION
Jacket of the product is made from sheet steel, is coated with a heavy-duty COMAXITE COATING which is
perfectly resistant to environment effects and ensures perfect appearance of products on long-term basis.
4.7 STANDARD ACCESORIES
- Instructions for installation and operation.
- Letter of guarantee.
- ½´´ inlet valve.
- Cleaning equipment (brush).
19
Summary of Contents for KP 10
Page 1: ......
