Polycom SoundPoint IP 670 User Manual Download Page 101

Page: 101 / 126

Using the SoundPoint IP Color Expansion Module

5 - 7

For example, in the figure below, press the fourth Line Key to dial home.

To assign a new speed dial key:

Press and hold an unassigned

A new empty entry in the contact directory is automatically opened

allowing contact information to be added.

Press the

More

soft key.

Press the

Add

soft key.

(Optional.) Enter first and/or last name of the contact from the keypad.
Use the

1/A/a

soft key to select between numeric and upper/lower case

alphanumeric modes.
Use the

Encoding

soft key to access special characters in other languages.

Enter a contact number.
The number must be unique (not already in the directory).

Change the Speed Dial Index field.
Valid speed dial index values are from 1 to 9999. If you enter a speed dial

index that already, “Speed dial index already exists” appears. If you enter

an invalid value, “Speed dial index invalid” appears.

Polycom recommends that you assign speed dial index values consecutively.

For example, if you assign the third Line Key to the speed dial index value “2”,
assign the fourth Line Key to the speed dial index value “3”.

Summary of Contents for SoundPoint IP 670































































































































Search results

Summary of Contents for SoundPoint IP 670

Reviews:

Related manuals for SoundPoint IP 670

Brands by name

Popular brands

Polycom SoundPoint IP 670, User Manual

Search results

Summary of Contents for SoundPoint IP 670

Reviews:

Related manuals for SoundPoint IP 670

Brands by name

Popular brands