Polycom SoundPoint IP 670 User Manual Download Page 91

Page: 91 / 126

Using the Advanced Features of Your Phone

4 - 15

Select the file that you want to play back using

and

, and then

press the

Open

soft key.

The filename you selected appears on the graphic display. The length of
the file (in hours, minutes, and seconds) and the size of the file also appear.

Press the

Play

soft key.

“Playing” appears on the graphic display. The position indicator (in

hours, minutes, and seconds) above the progress bar changes as the file

plays back in real time.
(Optional.) Press the

Pause

soft key to pause the file playback.

(Optional.) Press the Resume soft key to resume playback of the file.

Press the

Exit

soft key to stop playing back the file.

To play back the file from the start, refer to step 3.

Summary of Contents for SoundPoint IP 670































































































































Search results

Summary of Contents for SoundPoint IP 670

Reviews:

Related manuals for SoundPoint IP 670

Brands by name

Popular brands

Polycom SoundPoint IP 670, User Manual

Search results

Summary of Contents for SoundPoint IP 670

Reviews:

Related manuals for SoundPoint IP 670

Brands by name

Popular brands