Polycom SoundPoint IP 670 User Manual Download

Page: 66 / 126

User Guide for the SoundPoint IP 670 Desktop Phone

3 - 16

Joining Conferences

To join two conferences:

Previously you set up two separate conference calls between a number of

parties. Only one conference can be active at a time.

From the idle display, press the

Join

soft key.

Both conferences are joined into a single five-way conference.

Splitting Conference Calls

To split a conference call:

From the Active Conference page, press the

More

soft key, and then press

the

Split

soft key to split the conference.

All calls are split into individual calls and put on hold.

Ending Conferencing Calls

To end a conference call:

From the Active Conference page, press the

End Call

soft key or hang up.

The other parties will continue to be connected.

Summary of Contents for SoundPoint IP 670































































































































Search results

Summary of Contents for SoundPoint IP 670

Reviews:

Related manuals for SoundPoint IP 670

Brands by name

Popular brands

Polycom SoundPoint IP 670, User Manual

Search results

Summary of Contents for SoundPoint IP 670

Reviews:

Related manuals for SoundPoint IP 670

Brands by name

Popular brands