Polycom SoundPoint IP 670 User Manual Download

Page: 34 / 126

User Guide for the SoundPoint IP 670 Desktop Phone

2 - 10

Use

and

to highlight the background you want.

Press the

Select

soft key.

Press

to return to the idle display.

Changing the Soft Key Label Color

You can change the soft key label color that appears on the graphic display. A

default soft key label color displays when the phone starts up (shown below).

For more information on selections, contact your system administrator.

To change the soft key label color:

Press .

Note

When previewing the backgrounds, only the phone’s display is updated. The
Expansion Module’s display is updated only when the new background is selected.

Summary of Contents for SoundPoint IP 670































































































































Search results

Summary of Contents for SoundPoint IP 670

Reviews:

Related manuals for SoundPoint IP 670

Brands by name

Popular brands

Polycom SoundPoint IP 670, User Manual

Search results

Summary of Contents for SoundPoint IP 670

Reviews:

Related manuals for SoundPoint IP 670

Brands by name

Popular brands