Polycom SoundPoint IP 670 User Manual Download Page 41

Page: 41 / 126

Customizing Your Phone

2 - 17

Select

Contact Directory

Use

and

to highlight the contact.

You can also use the * key to page up and the # key to page down.

Press the

Edit

soft key

Edit the contact information.

Press the

Save

Cancel

soft keys to accept or cancel changes.

Press

to return to the idle display.

Deleting Contacts

To delete a contact from the local contact directory:

Press .

Select

Contact Directory

Use

and

to highlight the contact.

You can also use the * key to page up and the # key to page down.

Press the

More

soft key twice, and then press the

Delete

soft key.

The contact is deleted from the directory.

Press

to return to the idle display.

Note

You can quickly edit a contact associated with a speed dial key by pressing and
holding the contact’s speed dial key, and then complete steps 5 to 7.

Summary of Contents for SoundPoint IP 670































































































































Search results

Summary of Contents for SoundPoint IP 670

Reviews:

Related manuals for SoundPoint IP 670

Brands by name

Popular brands

Polycom SoundPoint IP 670, User Manual

Search results

Summary of Contents for SoundPoint IP 670

Reviews:

Related manuals for SoundPoint IP 670

Brands by name

Popular brands