Polycom
®
RealPresence
®
Capture Station Pro Administrator’s Guide 6.6
Polycom, Inc.
36
Optimize the Capture Card Image Quality Settings
You can configure quality and other settings for the RealPresence Capture Station Pro appliance.
To configure the capture card image quality settings:
1
From the start screen, choose
Edit > Advanced Settings
.
2
Under
General
, click
People Capture
.
3
On the
People Capture
page, shown next, click the
Properties
button to open the
Properties
dialog. You can access device settings, including video input type, from the list on the left panel.
This dialog is also where you set the regional video standard, such as NTSC, PAL, or SECAM.
NTSC Use NTSC for North America, Central America, and western South America.
PAL Use PAL for most of Europe, Asia, Australia and New Zealand, and parts of Africa.
SECAM Use SECAM for France, Russia, Eastern Europe, and parts of western Africa.
4
On the
Content Capture
page, click the
Properties
button to open the
Properties
dialog.
Configure Motion Detection
The RealPresence Capture Station Pro appliance can determine when to capture the next slide in a
presentation based on image change, mouse movement, or the changes in annotations. You can
configure motion-detection settings such as capture delay, the type of change in the slide, and the
sensitivity to changes.
The
capture delay
is the time between when the RealPresence Capture Station Pro appliance detects
screen motion and when the appliance actually takes the screen capture. For example, if your
presentation slides have an animated transition, you can capture the screen after the animation has
stopped by setting a Capture Delay slightly longer than the transition time.
Configure Motion-Detection Settings Using Default Profiles
RealPresence Capture Station Pro software uses
motion detection profiles
, preset motion-detection
settings that help streamline configuration of these settings.
To configure basic motion-detection settings:
1
From the start screen, choose
Edit
> Advanced Settings
.
2
Under
General
, click
Content Capture
.
