manualshive.com logo in svg

Poldent Endostar Provider, Instructions For Use Manual, Page: 37 / 48

Share
Download
Poldent Endostar Provider Instructions For Use Manual Download Page 37

36

Instructions for Use  2019-03-20

 

⹅

Disposal of Medical Devices

 

⹅

Service

 

⹅

2 Year Limited Warranty

Any medical devices which could possibly be contaminated must be first decontaminated by the responsible doctor or medical institution and 
then be disposed of in accordance with local laws and regulations.
The rechargeable battery should be recycled. Metal parts of the device are disposed as scrap metal. Synthetic materials, electrical components, 
and printed circuit boards are disposed as electrical scrap. Material must be disposed according to the relevant national legal regulations. Consult 
specialized disposal companies for this purpose. Please inquire of the local city/community administrations concerning local disposal companies.

The Endostar Provider should be repaired and serviced by J. MORITA’s authorized technicians.
Please contact and call Poldent Co. Ltd.’s local dealer for more details.

Maintenance and Inspection Items

Warranty

1.  Poldent Co. Ltd. gives a guarantee for two years beginning from the date of purchase. Within this period any defect that is due to faulty 

manufacturing or material will be remedied by repair or replacement at the judgment of Poldent Co. Ltd.

2. Warranty repair and service: in the event of a claim under this warranty, please contact with Poldent Co. Ltd.’s local dealer.
3. In the case of damage caused by wear and tear, careless handling and repairs not carried out by Poldent Co. Ltd., the warranty ceases to be 

valid. This guarantee may not form the basis for any claims for damages, in particular not for compensation of consequential damages.  
The buyer assumes responsibility for damage due to dropping of the device, improper use and utilization of product and chemicals other 
than those stated in this instruction manual for cleaning. It is the customer’s responsibility to maintain the exact rated voltage indicated at 
the bottom of the device, and the office maintains electrical outlets for proper performance of the charger.

4. This warranty does not include the external accessories, built-in electrode or batteries.

Summary of Contents for Endostar Provider

















































Reviews:

No comments