55
•
Replace the Mode Switch on the M.S. Disk.
•
On the Exposure Counter Indicator shaft, replace the Washer, E-Ring, Ratchet Wheel
and final E-Ring.
•
Replace the Exposure Counter Lever on its pivot pin, then reconnect the Spring
between the Lever and the Pawl.
Note: BEFORE REPLACING THE MOTOR DISK, PERFORM THE MODE
SELECT GEAR REASSEMBLY PROCEDURE.
•
Replace the Motor Disk with Motor on the back of the Shutter Assembly, using care to
mesh the gears properly. Secure the Motor Disk with six screws; the two longer screws
mount in the two posts on the right of the Disk.
Figure 3-26. M. blade assembly components
Summary of Contents for Miniportrait 455
