47
•
Remove the Exposure Counter Lever.
•
Remove the E-Ring “d” from the Exposure Counter Ratchet Gear “e”. Now remove the
Gear and the E-Ring and Washer beneath it.
•
Remove the screw securing the M. Switch “f”, then remove the M. Switch and Washer
(Figure 3-15).
Figure 3-15. Disassembling M. switch, S. set cam and lever components
•
Remove the Screw “g”, Gear “h” and Pin “i” from S. Set Cam Shaft “j”.
•
Remove the two E-Rings “k” from the Levers, on the front side of the assembly.
•
Remove the four screws securing the M.S. Disk to the M. Blade Assembly
(Figures 3-16 and 3-17).
•
Lift the M. Blade Assembly out of the Base Ring.
Summary of Contents for Miniportrait 455
