43
Replacing the Motor
Note: The Shutter Assembly can remain in the Camera.
•
Remove the Pack Film Holder Frame and Light Baffle (See Camera “Body
Disassembly”).
•
Unsolder the orange (+) and black (-) leads from Motor.
•
To remove the Motor Disk with Motor on it, remove the six mounting screws
(Figure 3-12).
Note: The screws for posts “a” are larger than the other four screws.
•
From the underside of the Motor Disk, remove the two screws and spacers securing
the Motor.
•
Install a new Motor on the Disk using the two screws and spacers. Resolder the
orange (+) and black (-) leads.
•
Remount the Motor Disk on the Shutter Assembly, and replace the Light Baffle and
Pack Film Holder Frame.
Figure 3-12. Removing the Motor Disk and Motor
Summary of Contents for Miniportrait 455
