117
Maintenance
Spark Plugs
Normal Plug
The normal insulator tip is gray, tan or light brown. There will be few combustion deposits.
The electrodes are not burned or eroded. This indicates the proper type and heat range for the
engine and the service. The tip should not be white. A white insulator tip indicates overheat-
ing, caused by use of an improper spark plug or incorrect carburetor/throttle body adjust-
ments.
Wet Fouled Plug
The wet fouled insulator tip is black. A damp oil film covers the firing end. There may be a
carbon layer over the entire nose. Generally, the electrodes are not worn. General causes of
fouling are excessive oil, use of non-recommended injection oil, improper use of the choke,
or incorrect carburetion adjustments.
Spark Plug Change
1. Remove the spark plug cap.
2. Using the special wrench provided in the tool pouch, rotate the spark plug counterclock-
wise to remove it.
3. Reverse the procedure for spark plug installation. Torque to 14 ft. lbs. (19 Nm).
Summary of Contents for Sportsman 9921796
