Polaris Sportsman 9921796 Owner'S Manual Download Page 18

Page: 18 / 192

Safety

Safety Warnings

Handling Gasoline

Gasoline is highly flammable and explosive

under certain conditions.
• Never allow a child to refuel or handle

gasoline.

• Always exercise extreme caution whenever

handling gasoline.

• Always refuel with the engine stopped, and

outdoors or in a well ventilated area.

• Do not smoke or allow open flames or sparks

in or near the area where refueling is

performed or where gasoline is stored.

• Do not overfill the tank. Do not fill the tank

neck.

• If gasoline spills on your skin or clothing,

immediately wash it off with soap and water

and change clothing.

• Turn the fuel valve off whenever the ATV is

stored or parked. See page 67.

Exposure to Exhaust

Engine exhaust fumes are poisonous and can

cause loss of consciousness or death in a short

time. Never start the engine or let it run in an

enclosed area.
The engine exhaust from this product contains

chemicals known to cause cancer, birth defects

or other reproductive harm. Operate this vehicle

only outdoors or in well-ventilated areas.

Summary of Contents for Sportsman 9921796

































































































































































































Search results

Summary of Contents for Sportsman 9921796

Reviews:

Related manuals for Sportsman 9921796

Brands by name

Popular brands

Polaris Sportsman 9921796, Owner'S Manual

Search results

Summary of Contents for Sportsman 9921796

Reviews:

Related manuals for Sportsman 9921796

Brands by name

Popular brands