Polaris Sportsman 9921796 Owner'S Manual Download Page 98

Page: 98 / 192

Operation

Hauling Cargo

• Never exceed the weight capacities for the vehicle. Capacities are listed in the specifications section

beginning on page 162.

• Secure all cargo before driving. Loose cargo may move or shift, which could cause loss of control or

a tipover. Use suitable tie-downs or rope to secure the cargo. Do not allow cargo or tie straps to hang

over the edges of the racks.

• Carry only small loads that fit on the racks. Tall loads raise the center of gravity of the vehicle and

may cause loss of control or a tipover.

• Never allow a person to ride on the racks.
• Never tow or pull an object behind the ATV. A wagon, sled or other object towed behind an ATV does

not have brakes or steering. The object may overturn or collide with other objects and cause serious

injuries.

Summary of Contents for Sportsman 9921796

































































































































































































Search results

Summary of Contents for Sportsman 9921796

Reviews:

Related manuals for Sportsman 9921796

Brands by name

Popular brands

Polaris Sportsman 9921796, Owner'S Manual

Search results

Summary of Contents for Sportsman 9921796

Reviews:

Related manuals for Sportsman 9921796

Brands by name

Popular brands