Polaris Sportsman 9921796 Owner'S Manual Download

Page: 30 / 192

Safety

Safety Warnings

Improper Vehicle Modifications

Improper installation of accessories or

modification of the ATV may cause changes in

handling, which could cause loss of control or an

accident.
Never modify the ATV through improper

installation or use of accessories. All parts and

accessories added to the vehicle must be

genuine Polaris Industries Inc. or equivalent

components designed for use on this ATV and

should be installed and used according to

approved instructions. See your authorized

Polaris ATV dealer for more information.

Operating Over Obstacles

Improperly operating over obstacles could cause

loss of control or overturn.
Before operating in a new area, check for

obstacles. Avoid operating over large obstacles

such as rocks and fallen trees. If unavoidable,

use extreme caution and always follow proper

operating procedures as outlined in this manual.

Skidding or Sliding

Skidding or sliding can cause loss of control or

overturn (if tires regain traction unexpectedly).

On slippery surfaces such as ice, travel slowly

and use extra caution to reduce the chance of

skidding or sliding.

Summary of Contents for Sportsman 9921796

































































































































































































Search results

Summary of Contents for Sportsman 9921796

Reviews:

Related manuals for Sportsman 9921796

Brands by name

Popular brands

Polaris Sportsman 9921796, Owner'S Manual

Search results

Summary of Contents for Sportsman 9921796

Reviews:

Related manuals for Sportsman 9921796

Brands by name

Popular brands