Polaris Sportsman 9921796 Owner'S Manual Download Page 56

Page: 56 / 192

Riding Rules

Never ride alone. An adult should always be watching you in case you need help. Always

drive within the sight of an adult.

Never ride on public trails.

Don't ride your ATV on roads or over railroad tracks. Your ATV makes noise that will

keep you from hearing cars, trucks or trains that may be coming towards you.

Don't ride at night. Your ATV doesn't have lights that are safe for driving in the dark.

Learn where there are lakes, rivers, ponds and ditches in your driving area. Stay away

from them.

Never ride on frozen water. You could get hurt or you could even die. All ice can be dan-

gerous!

Ride your ATV only where you know it is safe to drive and where you have permission to

drive. Be careful of the things around you.

Always be a polite driver. (Don’t drive through the flower garden or over the little trees

you planted!)

Always do your best to help take care of nature.

Summary of Contents for Sportsman 9921796

































































































































































































Search results

Summary of Contents for Sportsman 9921796

Reviews:

Related manuals for Sportsman 9921796

Brands by name

Popular brands

Polaris Sportsman 9921796, Owner'S Manual

Search results

Summary of Contents for Sportsman 9921796

Reviews:

Related manuals for Sportsman 9921796

Brands by name

Popular brands