Polaris Sportsman 9921796 Owner'S Manual Download

Page: 34 / 192

Safety

Safety Warnings

Hot Exhaust Systems

Exhaust system components are very hot during

and after use of the vehicle. Hot components can

cause burns and fire. Do not touch hot exhaust

system components. Always keep combustible

materials away from the exhaust system.
Use caution when traveling through tall grass,

especially dry grass. Always inspect the

underside of the ATV after driving through tall

grass, weeds, brush and other tall ground cover.

Promptly remove any grass or debris clinging to

the vehicle.

Unauthorized Use of the ATV

Leaving the keys in the ignition can lead to

unauthorized use of the vehicle, which could

result in an accident or overturn. Always remove

the ignition key when the vehicle is not in use.

Summary of Contents for Sportsman 9921796

































































































































































































Search results

Summary of Contents for Sportsman 9921796

Reviews:

Related manuals for Sportsman 9921796

Brands by name

Popular brands

Polaris Sportsman 9921796, Owner'S Manual

Search results

Summary of Contents for Sportsman 9921796

Reviews:

Related manuals for Sportsman 9921796

Brands by name

Popular brands