Polaris Sportsman 9921796 Owner'S Manual Download

Page: 64 / 192

Features and Controls

Throttle Lever

Press the throttle lever toward the handlebar to

increase engine speed and vehicle movement.

Engine speed returns to idle when the lever is

released.
This ATV is equipped with an Electronic Throttle

Control (ETC), which is designed to reduce the

risk of a frozen or stuck throttle. If the throttle

cable should stick in an open position when the

operator releases the throttle lever, the engine will

stop and power to the rear wheels will cease.

WARNING! The Electronic Throttle Control (ETC) stops

the engine in the event of a throttle system malfunction. Modifications to the electronic throttle control

could result in failure to perform as designed, which could result in an accident. Do not attempt to

modify the ETC system or replace it with any after market throttle mechanism. Always ensure that the

throttle cable is installed and properly routed to the throttle control.

Throttle

Lever

Summary of Contents for Sportsman 9921796

































































































































































































Search results

Summary of Contents for Sportsman 9921796

Reviews:

Related manuals for Sportsman 9921796

Brands by name

Popular brands

Polaris Sportsman 9921796, Owner'S Manual

Search results

Summary of Contents for Sportsman 9921796

Reviews:

Related manuals for Sportsman 9921796

Brands by name

Popular brands