Polaris DP-20, User Manual, Page: 52 / 66

DP-20 WEB GUIDE CONTROLLER USER MANUAL
6
6-30
4. Use the ARROW keys to scroll until TEST
SIGNALS is displayed on line 3.
5. Press the ENTER key to enter the TEST
SIGNALS menu. SENSOR CURRENT will be
displayed on line 3.
6. Use the ARROW keys to scroll until GUIDE
TEST MODE is displayed on line 3.
7. Press the ENTER key to enter the GUIDE
TEST MODE menu. RUNNING will be
displayed on line 2 which indicates that the
oscillator is running. The currently selected
oscillation mode will be displayed on Line 3.
8. Use the SENSOR key to change the mode, if
desired. After a mode change, the mode
designation on line 3 will flash for 20 seconds.
If mode 1 is selected, the guide oscillates back
and forth within 80% of the bandwidth of the
currently selected sensor, simulating
instantaneous 80% Guide Point Shifts. If
mode 2 is selected, the guide oscillates back
and forth within 80% of the bandwidth of the
currently selected sensor, simulating 4% steps
in Guide Point Shift. If mode 3 is selected, the
guide oscillates, switching back and forth
between the Guide Point of the left edge sensor
and the Guide Point of the right edge sensor
(with 0% Guide Point Shift in both sensors).
This requires the sensors to be placed at a
spacing wider than the width of the web. The
sensor spacing determines the amplitude of the
oscillation.
× 3A.3.8
SETUP (MAN)
TEST SIGNALS
× 3A.3.8.1
SETUP (MAN)
SENSOR CURRENT
× 3A.3.8.3
SETUP (MAN)
GUIDE TEST MODE
× 3A.3.8.3.1
RUNNING
× MODE1 1
-ÜÜÜÜÜÜÜÜ+ 0.50s
× 3A.3.8.3.1
RUNNING
× MODE1 10
-ÜÜÜÜÜÜÜÜ+ 0.01s
× 3A.3.8.3.2
RUNNING
× MODE2 1
-ÜÜÜÜÜÜÜÜ+ 0.01s
× 3A.3.8.3.3
RUNNING
× MODE3 10
-ÜÜÜÜÜÜÜÜ+ 0.01s
06-05-2007 DP-20 WEB GUIDE CONTROLLER Figure Sheet 1-862-D