Polaris DP-20, User Manual, Page: 49 / 66

DP-20 WEB GUIDE CONTROLLER USER MANUAL
6
6-27
7. Press the ENTER key to store the change or
press the MANUAL key to abort the procedure.
The system will exit the setup menus, and
return to the Operator Level.
3A
MANUAL
× -ãããããáÜÜÜÜ+
3X.3.7, Digital I/O, Enable/Disable
1. Press the SETUP key to enter the Setup
Menus. The SELECT MENU screen will be
displayed on the LCD Panel.
2. Use the ARROW keys to scroll until
ADVANCED is displayed on line 4.
3. Press the ENTER key to enter the Advanced
Menus. The RESTORE SETTINGS menu will
be displayed.
4. Use the ARROW keys to scroll until DIGITAL
I/O is displayed on line 3. The current setting is
displayed on Line 4.
5. Press the ENTER key to enter the DIGITAL I/O
menu. The current setting will begin flashing.
6. Use the ARROW keys to scroll to the desired
setting (ENABLED or DISABLED).
7. Press the ENTER key to store the change or
press the MANUAL key to abort the change.
The system will exit the setup menus, and
return to the Operator Level.
× 3A.1
SETUP (MAN)
SELECT MENU
BASIC
× 3A.3
SETUP (MAN)
SELECT MENU
ADVANCED
× 3A.3.1
SETUP (MAN)
RESTORE SETTINGS
× 3A.3.7
SETUP (MAN)
DIGITAL I/O (X3)
ENABLED
× 3A.3.7.1
SETUP (MAN)
DIGITAL I/O (X3)
ENABLED
× 3A.3.7.1
SETUP (MAN)
DIGITAL I/O (X3)
DISABLED
3A
MANUAL
× -ãããããáÜÜÜÜ+
3X.3.8.1, Test Signals, Sensor Current
This menu is to be used for viewing the raw sensor signals (in mA) with
no scaling applied.
1. Press the SETUP key to enter the Setup
Menus. The SELECT MENU screen will be
displayed on the LCD Panel.
× 3A.1
SETUP (MAN)
SELECT MENU
BASIC
06-05-2007 DP-20 WEB GUIDE CONTROLLER Figure Sheet 1-862-D