Polaris DP-20, User Manual, Page: 31 / 66

DP-20 WEB GUIDE CONTROLLER USER MANUAL
6
6-9
6. Press the ENTER key to begin the Auto Setup.
If the web is not positioned near the center of
the sensor field of view, the LCD Panel will
display POSITION WEB IN CENTER OF
SENSOR. Once the web is moved to near the
center of the sensor field of view, the Auto
Setup procedure will continue.
7. Once the Auto Setup is complete, if it was
successful, SUCCESSFUL will be displayed for
a few seconds on line 3, then the unit will
automatically exit the menus and return to the
Operator Level. The Guide Point is set to 0. If a
Deadband was stored before Auto Setup was
performed, the Deadband setting is restored.
—
OR
—
8. Once the Auto Setup is complete, if it was not
successful, FAILED will be displayed on line 3.
Press the MANUAL key to exit the setup menus
and return to the Operator Level. The Guide
Point and Deadband are restored to the values
stored before the Auto Setup was attempted.
Repeat this procedure, as required.
Ø 3B.1.5.3
POSITION WEB IN
CENTER OF SENSOR
-ãããããÜÜÜÜÜ+
Ø 3B.1.5.4
SETUP (MAN)
SUCCESSFUL
3B
MANUAL
Ø -ãããããáÜÜÜÜ+
Ø 3B.1.5.3
SETUP (MAN)
FAILED
3X.1.6, Servo-Center Gain
1. Press the SETUP key to enter the Setup
Menus. The SELECT MENU screen will be
displayed on the LCD Panel.
2. Press the ENTER key to enter the BASIC
Menus. The GAIN menu will be displayed.
3. Use the ARROW keys to scroll until
~ƒ
GAIN is
displayed on line 3.
4. Press the ENTER key to allow adjustment of
the Servo-Center Gain. The current Gain value
will begin flashing on line 4.
× 3A.1
SETUP (MAN)
SELECT MENU
BASIC
× 3A.1.1
SETUP (MAN)
GAIN
ãÜÜÜÜÜÜÜÜÜ 10.0%
× 3A.1.6
SETUP (MAN)
~ƒ GAIN
ãÜÜÜÜÜÜÜÜÜ 5.0%
× 3A.1.6.1
SETUP (SC)
~ƒ GAIN
ãÜÜÜÜÜÜÜÜÜ 5.0%
06-05-2007 DP-20 WEB GUIDE CONTROLLER Figure Sheet 1-862-D