Polaris DP-20, User Manual, Page: 45 / 66

DP-20 WEB GUIDE CONTROLLER USER MANUAL
6
6-23
6. Using the proper keys, enter the current
password. Each key press is indicated by an “*“
on Line 4.
7. Press the ENTER key to accept the password.
CHANGE and DISABLE will be displayed on
Line 4. CHANGE will be flashing.
8. Use the ARROW keys to select DISABLE.
DISABLE will then begin flashing.
9. Press the ENTER key to delete the password
or press the MANUAL key to abort the
procedure. The system will exit the setup
menus, and return to the Operator Level.
× X3A.3.3
SETUP (MAN)
ENTER PASSWORD
******
× X3A.3.3.1
SETUP (MAN)
SET PASSWORD
CHANGE DISABLE
× X3A.3.3.1
SETUP (MAN)
SET PASSWORD
CHANGE DISABLE
× 3A.3.3.5
SETUP (MAN)
(NO PASSWORD)
3A
MANUAL
× -ãããããáÜÜÜÜ+
3X.3.3, Set Password, Change Password
(Use these menu instructions only if a password is currently stored).
1. Press the SETUP key to enter the Setup
Menus. The SELECT MENU screen will be
displayed on the LCD Panel.
2. Use the ARROW keys to scroll until
ADVANCED is displayed on line 4.
3. Press the ENTER key to enter the Advanced
Menus. The RESTORE SETTINGS menu will
be displayed.
4. Use the ARROW keys to scroll until SET
PASSWORD is displayed on line 3.
(ENABLED) which is displayed on Line 4,
indicates that a password is currently enabled.
5. Press the ENTER key to enter the SET
PASSWORD menu. ENTER PASSWORD will
be displayed on line 3.
× 3A.1
SETUP (MAN)
SELECT MENU
BASIC
× 3A.3
SETUP (MAN)
SELECT MENU
ADVANCED
× 3A.3.1
SETUP (MAN)
RESTORE SETTINGS
× X3A.3.3
SETUP (MAN)
SET PASSWORD
(ENABLED)
× X3A.3.3
SETUP (MAN)
ENTER PASSWORD
06-05-2007 DP-20 WEB GUIDE CONTROLLER Figure Sheet 1-862-D