Polaris DP-20, User Manual, Page: 46 / 66

DP-20 WEB GUIDE CONTROLLER USER MANUAL
6
6-24
6. Using the proper keys, enter the current
password. Each key press is indicated by an
“*“ on Line 4.
7. Press the ENTER key to accept the password.
CHANGE and DISABLE will be displayed on
Line 4. CHANGE will be flashing.
8. Press the ENTER key to select CHANGE.
ENTER PASSWORD will be displayed on line
3.
9. Using the proper keys, enter the desired new
password. Each key press is indicated by an “*“
on Line 4. The MANUAL and ENTER keys are
not allowed to be used in passwords.
10. Press the ENTER key to accept the password.
REENTER PASSWORD will be displayed on
line 3.
11. Using the proper keys, re-enter the desired new
password. The password must be the same as
previously entered. If a different password is
entered, “WRONG PASSWORD“ will be
displayed.
12. Press the ENTER key to store the new
password or press the MANUAL key to abort
the procedure. The system will exit the setup
menus, and return to the Operator Level.
× X3A.3.3
SETUP (MAN)
ENTER PASSWORD
******
× X3A.3.3.1
SETUP (MAN)
SET PASSWORD
CHANGE DISABLE
× X3A.3.3.2
SETUP (MAN)
ENTER PASSWORD
× X3A.3.3.2
SETUP (MAN)
ENTER PASSWORD
******
× X3A.3.3.3
SETUP (MAN)
REENTER PASSWORD
× X3A.3.3.3
SETUP (MAN)
REENTER PASSWORD
******
× 3A.3.3.4
SETUP (MAN)
PASSWORD STORED
3A
MANUAL
× -ãããããáÜÜÜÜ+
3X.3.4, Set Output A Delay
1. Press the SETUP key to enter the Setup
Menus. The SELECT MENU screen will be
displayed on the LCD Panel.
2. Use the ARROW keys to scroll until
ADVANCED is displayed on line 4.
× 3C.1
SETUP (MAN)
SELECT MENU
BASIC
× 3A.3
SETUP (MAN)
SELECT MENU
ADVANCED
06-05-2007 DP-20 WEB GUIDE CONTROLLER Figure Sheet 1-862-D