- 26 -
1600-GB Maintenance_2740
GB
MAINTENANCE
Caution!
Turn engine off and
remove key before
carrying out main-
tenance or repair
work.
Caution!
Only carry out
maintenance
work on firm, flat
ground.
Caution!
Secure the machine
against rolling us-
ing wheel chocks.
Transmission
Oil quantity:
1.3l litre SAE 90
Oil level check:
The oil level is correct if the gear oil
reaches the middle of the inspection
window (1).
1
Oil change:
After the first 50 hrs
then every 500 hrs
The oil can be changed only when the swath curtain is
in lowest position. (see section Swath curtain height)
Otherwise the oil plug (2) on the lower side of the gear is
not accessible.
2
1
Position of the filling screw (3):
right in driving direction on the gear (see figure)
3
Chassis
Steered chassis
Setting the steering axle:
Only if the frame chassis does not trail aligned behind the
tractor when travelling straight ahead!
1. Loosen locknut at position (4)
2. Remove splint (5) and loosen nut at position (5)
at the start of the steering rod, directly behind the
tractor.
3. Pull the steering rod up and away.
4. Turn the spindle (6) until the required steering axle
position is reached.
5. Re-fit ball joint
6. Re-insert splint at position (5) and re-tighten nut at
positions (4, 5).
4
6
5
