- 10 -
1600-GB_Attaching_2740
ATTACHING THE MACHINE
GB
Trimming process
- To adjust the length, hold cardan shaft halfs in the
shortest operating position (L2) next to one another
and mark.
Shortest possible operating position (L2):
1. Lower hoist completely
2. Steering turned to lock.
(see adjacent illustration)
354-15-41
L2
For details see Chapter "Adapting the cardan shaft" in
supplement B of these Operating Instructions.
Parking the machine
The machine can be parked in working position as well as
in transport position.
Beware!
- Park the machine stably!
- Secure the machine against rolling with
wheel chocks.
Before leaving the machine, bring the
control unit to the floating position so
that the hydraulic lines can easily be
uncoupled later.
1. Fold in the support stand
- Unlock spring-loaded bolts (B)
- Swivel support stand (5a) up and let it engage
Be advised!
Only park the ma-
chine on flat, firm
ground!
Be ad-
vised!
Turn the tractor
engine off and
remove the key
before parking the
machine.
2. Uncouple lines and the drivetrain
- Pull the cardan shaft off and place it on the support
(6).
- Uncouple the hydraulic lines and place them in the
hose support (7) (If problems occur, bring the control
unit to floating position)
7
6
- Remove the cord (Standard) or the cable and the
control unit (single rotor raising) from the tractor
cabin
- Uncouple electric cable from tractor and place it on
the cable holder (7) (For single rotor operation, two
electric cables need to be uncoupled.)
- Uncouple implement from tractor.
