GB
TRANSPORT
1600_GB-TRANSPORT_2740
- 23 -
Fitting the tine coverings:
1. Pin the tine covering right across all tines on a tine arm.
Cover all remaining tine arms on the machine using a
protective covering.
Make sure that the machine still remains
below the statutory transport height in
the transport position with the attached
tine covering.
Take note of the ground clearance. The
tine covering could become lost due
to insufficient ground clearance while
travelling.
Take note of the distance to the front wheel
of the rotor chassis. The tine covering could
become lost because of too little distance
while travelling.
Storing the tine coverings:
Insert the tine coverings (4) onto the holders provided for
this, when not in use. These holders are located next to
the hoop guard at the front of the machine.
4
5
1. Insert the tine covers (4) alternatively from left to right
onto the holder.
5
4
2. Secure the tine covers (4) with two splints per support (5).
TOP 842 C
13 tine arms per side
TOP 962 C
8 tine arms per side
