(348) TRANSPORTSTELLUNG 0400-GB
GB
- 8 -
Attention!
Take care with transport positions 1, 2, 3.
Before swivelling the cutter bar up, turn
off the drive and wait for the mower discs
to come to a complete standstill.
NOTE:
The implement has been so designed that the mower
unit is positioned as close as possible to the tractor.
This has important advantages for both mowing and
transporting operations.
• The implements´s centre of gravity lies close to the
tractor and through this
- less supporting structure load
- less load alleviation of the steering axle when
transporting
- better cutter bar ground adaption when mowing
• The mower bar can be swivelled into 3 different positions
for transportation.
Safety Precaution!
see supplement-
A1 points 7.), 8c.
- 8h.)
Changing from
working position
to transport
position is only
to be carried out
on even, firm
ground.
Never let mowing
mechanism run
with the mower
raised.
Swinging cutter bar down
- Make sure that
swivel area is free
and that nobody
is standing in the
danger area.
Conversion from working to transport position
Conversion from transport to working position
- Gently raise cutter bar with swivel cylinder so that hook
(13) can be released.
- Release hook (13) by pulling on the rope (S2).
- Lower cutter bar hydraulically.
Up to 2003 model
From 2004 model
48/00/20
TRANSPORT- AND WORKING POSITION
