- 15 -
1300_GB-INBETRIEBNAHME_379
INITIAL OPERATION
GB
Mowing
1. Set cutting height by turning upper link spindle
(max. 5° incline for mower discs)
2. For mowing, slowly engage the p.t.o. shaft
away from the crop and bring the mower rotor
up to full speed.
Smoothly increasing the p.t.o. speed will avoid system-
related noises from the p.t.o. shaft free-running.
- The driving speed depends on the ground conditions
and the crop to be mown.
Reversing
Raise the mower when reversing!
Adjustment
• The tractor's hydraulics must be set so the machine
can follow the ground contours.
- Hydraulic control valve (ST) on Floating position
- The cardan shaft (GW) position should be roughly
horizontal when mowing.
H1
GW
TD 4-00-1
- Mounting frame horizontal
- Secure the lower link so that the implement cannot
swing out sideways.
