(348) ANFAHRSICHERUNG 0100-GB
GB
- 25 -
COLLISION SAFETY DEVICE
Collision safety device
When mowing around trees, fences, boundary stones etc., collisions
between the cutter bar and obstacles can occur despite careful and slow
driving. Therefore, in order to prevent such damage, collision protection
has been planned for the cutting device.
Attention!
It is not the intention of the collision safety device to prevent damage to
the machine when working at full speed.
Variant-1:
Mechanical collision safety device,
with spring loaded hook (1)
Variant-2:
Hydraulic collision safety device (2),
with hydraulic slewing unit
How the hydraulic collision safety device functions
When a collision with an obstacle occurs, the cutter bar swivels back far
enough for it to pass by.
Then the cutter bar can be swivelled back hydraulically into the operating
position.
To do this, actuate the double-action control valve.
Instruction:
switching from working to transport position (and vice versa)
can be carried out even by this swivel device. See also chapter entitled
”Transport and working position”
Function of collision safety device
If the mower encounters an obstacle, the springloaded hook (1) is released
and the cutter bar can swing back.
If you reverse a short distance then, the hook is relocked into position.
Adjustment:
In case the safety device trips to easy adjust hexagonal nut (Attention!
Adjusting measurement: min. 100 mm).
Instruction:
adjusting measurement (X1) is the same for all types (110
mm)
EUROCAT 275 H, 275 H-ED:
X1 = 110 mm
(min. 100 mm)
NOVACAT 225 H, 225 H-ED
X1 = 110 mm
(min. 100 mm)
NOVACAT 265 H, 265 H-ED:
X1 = 110 mm
(min. 100 mm)
NOVACAT 305 H, 305 H-ED
X1 = 110 mm
(min. 100 mm)
NOVACAT 350 H:
X1 = 110 mm
(min. 100 mm)
IF YOU ARE NOT SURE WHETHER THE CUTTING
AREA IS REALLY FREE OF OBSTACLES, PLEASE
WORK AT AN APPROPRIATE SLOW SPEED!
