43
IP Configuration Information
You may get the IP configuration information of your PC by following the steps below:
1. Click “Start”
”All Programs”
”Accessories”
”Command Prompt” to access
the Command Prompt window.
2. Enter “ipconfig” after “C:\>” and press the “Enter” key on your keyboard.
3. Write down the information including “IP Address”, “Subnet Mask” and “Gateway”
for IP configuration of the NVR.
Information
When you connect the NVR to your community network, the PC
IP configuration information is for your reference. Revise the last
number to specify a unique IP address for the NVR.
