Keep the area clear and dust-free during and after installation.
The installation of the Server should obey the national and local electrical
codes.
Make sure the Server can be connected via cable and can be accessed by
you for future configurations.
Do not place or stack any objects directly on top of the Server.
Do not attempt to dismantle or replace the hard disk drive to prevent the
system from being damaged or malfunctioned.
Do not replace incorrect type of battery on the Server main board. There is
risk of explosion if the battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions.
Warning
It is extremely important that you use the
foot stand to put the Server in an upright
position while using the server, or the
system might become unstable. Any
damages caused are not included in the
warranty coverage.
The Server is equipped with a built-in CF
Card (Compact Flash Card) to save all the
application programs running on the
Server. Do not attempt to dismantle or
replace the CF Card (Compact Flash Card)
to avoid the system being damaged or
malfunctioned. Risk of system damage or
malfunction might occur. Any damages
caused by the prohibited CF Card (Compact
Flash Card) replacement are not included in
the warranty coverage.
Operating Environment Requirements
Please make sure the Server is deployed under the following environmental conditions:
3
Operating Temperature
5
°
C~40
°
C
Storage Temperature
-40
°
C ~60
°
C
Humidity Max.
90%
