10
You have to assign a fixed IP address to the Server to avoid IP address confliction when
you already have a DHCP server other than this server in your LAN. Please revise the
default IP address according to your local DHCP server settings.
Setting up with Web Browser
The setup process is performed through a web browser running on a computer in your
network. After you complete the setup process, the Server can be managed from any
computer on the network via the web browser. To avoid the control of the Internet being
taken by your PC over the Server, before you start to configure the Server via your PC,
please make sure that the Server is powered on.
Logging in the Administrator’s Interface
You can log in the Server via the administrator’s interface via the web browser, and turn
on the administrator’s functions without the pre-installed hard disk drive. The purpose
for this is to make sure the system operate properly. However, it is strongly
recommended that you install a hard disk drive to achieve the best server performance.
All data can’t be saved if the hard disk drive is not installed.
Logging in
http://192.168.0.1/admin/
as Server
Administrator
To log in as an administrator, enter the default IP address
http://192.168.0.1/admin/
in the URL field of your web browser and press
Return
(or
Enter
) on your keyboard. Administrator interface is designed for
administrators to configure the server management functions.
Logging in
http://192.168.0.1/user/
as an individual
User
To log in as a user, enter the default IP address
http://192.168.0.1/user/
in the
URL field of your browser and press
Return
(or
Enter
) on your keyboard. User
Interface is designed for personal users to change personal passwords and
configure the personal email management functions.
