12
ULTRAPLEX 40X OPERATION MANUAL
➀
➀
Audio Output Connector:
Outputs stereo analog signal. Use to connect to
soundboard or audio amplifier. Use standard MPC-3 type, 4-pin connector.
➁
➁
Jumpers:
Use to select SCSI ID number, parity, termination, test, block size, or eject
lock. Leave these jumpers at their factory settings unless one or more of the following
situations pertain to you:
SCSI ID number:
If you are using more than one SCSI peripheral, you may have
to change your SCSI ID number, page 18.
Termination:
Review Chapter 7 to determine if you need to turn your terminator
switch off.
Block size:
If you are working in a UNIX environment and want to boot from
your CD-ROM drive, page 20.
➂
➂
SCSI Interface Connector:
Connects to SCSI interface board. The UltraPleX 40max
uses a 50-pin Header Type flat ribbon SCSI cable. The UltraPleX Wide uses a
68-pin connector.
➃
➃
Power Connector:
Connects to your computer’s power supply (DC +5V and +12V).
CHAPTER 5 — Drive Features
Summary of Contents for PX-40TSe
Page 93: ......
