Plextor 241040 ATAPI, Operation Manual

Page: 58 / 72

Appendix A: PlexWriter Specifications
54
PlexWriter 24/10/40A Operations Manual
Rear Panel
Power Supply DC +5V: Average 600 mA during writing, 600 mA during
reading. Maximum 1A.
DC +12V: Average 800 mA during writing, 800 mA during
reading. Maximum 1.8A (during spinup).
Interface Connector IDE bus, 40-pin flat ribbon type. Interface complies with
ANSI X3T13/1153D (ATA/ATAPI-4). Supports CD-ROM
commands, including special commands for CD-R and
CD-RW.
Maximum total cable length should be less than 18 in
(45.7 cm).
Analog Audio Output Stereo analog output, Molex connector (L*G*G*R),
MPC3 standard
Digital Audio Output Digital audio output for input to SPDIF or Digital_In input
Mode Jumper Master, Slave, Cable Select
DMA Jumper No jumper: Ultra DMA Mode-2 (33.3 MB/s).
Jumper installed: DMA Mode-2 (16.6 MB/s)
Environmental Conditions
Operating Temperature
0 to 40 degrees Celsius
Performance Guarantee
Temperature
5 to 40 degrees Celsius
Operating Humidity
20% to 80% (non-condensing)
Storage Temperature
–40 to 60 degrees Celsius
Storage Humidity
20% to 95% (non-condensing)
Dimensions and Weight
Dimensions (W/H/D)
(excluding front panel) 5.78" x 1.64" x 7.95"
146mm x 41.3mm x 202mm
Weight 2.5 lbs. (1.2 kg)
Reliability
MTBF 60,000 Power On Hours (15% duty cycle)
Tray Loading 100,000 Load/Unload Cycles