Installation | Assembly Instructions
43
Cooling Pad | Installation and Operation Guide Rev B | Doc P/N: 080205039E
18
46
21
NOTE:
If the final cooling pad is too wide,
measure the remaining width needed
and add 3 - 5 cm for a tight fit. Cut the
cooling pad to width
5.
Insert the cooling pads (21)
and slide them into place
6.
Insert distribution pads (22)
on top of the cooling pads
7.
Attach the outward facing
hood (18) to the gutter with self-
drilling screws (46) every 50 cm
NOTE:
Verify that the pads are installed
according to the orientation arrows
printed on the side of each pad, and
that the black coating is facing out
UP
INSIDE
WWW
