Preventive Maintenance | Cooling Pad System Maintenance and Cleanup
66
Cooling Pad | Installation and Operation Guide Rev B | Doc P/N: 080205039E
5.4.4 Cleaning the Reservoir Channel
1. Open the cleaning hole plug (25) and drainage pipe valve (61)
to drain the water from the reservoir channel.
2. Remove the maintenance lids (23) located on both sides of the
reservoir channel.
3. Remove the pump (see steps 1 and 2 in
4. Verify the pump inlet valve (53) is open.
5. Use water to flush and clean the reservoir channel.
6. If there is still dirt in the channel, use a cleaning rod wrapped with
a cloth to clean the dirt, then use water again to flush and clean
the reservoir channel.
23
53
23
25
61
WWW
