Planmeca ProMax 3D Mid Manual Download Page 57

Page: 57 / 106

9.2 Patient positioning

1. Select the ProFace program (Special Programs > ProFace).
2. Select the patient entry position as described in section "Selecting

patient entry position" on page 34.

3. Guide the patient to the X-ray unit. The patient can sit or stand

during the exposure. Ask the patient to keep their hair away from

their face and ears.

NOTE

We recommend that you image patients with poor health in a

sitting position.

4. Adjust the X-ray unit to suit the height of the patient. To do this, press

either of the height adjusting buttons until the patient support table is

approximately level with the patient’s lower jaw.

5. Position the patient’s head in the head support. You can adjust the head

support by turning the adjusting knob at the top.

9 3D face photo

User's manual

Planmeca ProMax 53

Summary of Contents for ProMax 3D Mid











































































































Search results

Summary of Contents for ProMax 3D Mid

Reviews:

Related manuals for ProMax 3D Mid

Brands by name

Popular brands

Planmeca ProMax 3D Mid, Manual

Search results

Summary of Contents for ProMax 3D Mid

Reviews:

Related manuals for ProMax 3D Mid

Brands by name

Popular brands