Planmeca ProMax 3D Mid Manual Download Page 33

Page: 33 / 106

You can use temple pads if you take exposures of children, or patients with

small heads. Slide the temple pads onto the adjustable head support as

shown. Ensure that you slide the temple pads as far up as they will go.

NOTE

Use temple pads on both sides (not on one side only).

You can use fastening straps for additional head support if needed. Attach

one strap in front of the forehead and two at the back of the head as shown.

NOTE

Be careful when you handle the straps. Do not let the straps hit the patient in

the eye or face.

NOTE

Do not overstretch the straps. The straps lose their elasticity if you pull them

more than 50 mm (2 in.). Straps with a free length (i.e. when they are not

stretched) of over 255 mm (10 in.) do not support the patient’s head firmly.

8 3D patient exposure

User's manual

Planmeca ProMax 29

Summary of Contents for ProMax 3D Mid











































































































Search results

Summary of Contents for ProMax 3D Mid

Reviews:

Related manuals for ProMax 3D Mid

Brands by name

Popular brands

Planmeca ProMax 3D Mid, Manual

Search results

Summary of Contents for ProMax 3D Mid

Reviews:

Related manuals for ProMax 3D Mid

Brands by name

Popular brands