Selecting demo mode
You can switch demo mode on if you wish to practice or demonstrate the
functions of the X-ray unit without radiation and PC connection. To do this,
select Settings > User > 1300 Operational settings > 1310 Use Mode > 1311
Set Demo Mode. The selection displays in the bottom left corner of the touch
screen.
6.9 ProTouch desktop application
If the ProTouch desktop application is installed on your computer, you can
use a virtual control panel on your computer screen.
The application is identical to the touch screen that is integrated to the X-ray
unit. The two control panels are synchronised, and you can use either or
both of them.
NOTE
You need a licence if you wish to use the application for moving to the ready
status. Contact your dealer for help.
To use the virtual control panel, double-click the ProTouch icon on your
computer screen. Then click your mouse on the function that you wish to
use.
NOTE
A help message appears if you use the settings menu before opening the
application. The application automatically closes when you accept the help
message. You can reopen the application by double-clicking the icon again.
The small icon in the bottom left corner of the screen indicates when the
application is connected to the X-ray unit.
6 Main parts
18 Planmeca ProMax
User's manual
Summary of Contents for ProMax 3D Mid
Page 1: ...PlanmecaProMax 3D Plus 3D Mid user s manual 3D imaging EN 10032998 10032998...
Page 104: ......
Page 105: ......
