93
Chapter15 Upgrade Firmware
15
Procedure C: Using the Init Button and the TFTP Client
1.Plug in the power adaptor while pressing the Init button until LED
indicators of Power, USB1 and USB2 blink.
Please note that after
that, the Server will operate using the factory default values after
restarting, i.e., your Server
Ņ
s configuration will recover to Factory
Default values
.
2.Start the TFTP client Tool: Image Burner
3.Enter the Server's Fallback IP address: 192.168.1.200 and click
Open
Image
to open your new firmware. Please note that you must configure
your PC's TCP/IP such that PC and the Server belong to the same LAN,
i.e. PC's IP is 192.168.1.xxx and subnet mask is 255.255.255.0.
4.Click
Upload Image
.
5.Wait for
Image Uploading
to finish and then click
Close
.
6.Plug-off the power adapter and then plug-in the power adapter to restart
the Server.
Summary of Contents for mini-mfp
