Planex mini-mfp, User Manual

Page: 52 / 101

45
Chapter6 File Server
6
4.Set up File Server Configuration:
A.Set SMB/CIFS Print/File Server
Ś
Enable SMB/CIFS Print/File Server : select the item, if you want to
support SMB/CIFS print/File server.
Ś
Enable Internet Access : clear the item, if you do not allow that users
can access your SMB/CIFS server via Internet. If you select the item,
you allow Internet users can access your storage using the SMB/CIFS
protocol.
Ś
Enable Server Authentication : select the item, if you want to share
your storage or printer with user level security which requires user name
and password to login. If you clear the item, your storage will be shared
without security.
B.Set FTP Server:
Ś
Enable FTP Server : select the item, if you want to support FTP server.
Ś
FTP port : enter the desired FTP port. The default value is 21.
Ś
Maximum Session Number : select the item and fill in desired number.
Ś
Enable Passive Mode : select the item, if you want to allow that your
FTP server can accept passive mode command.
Ś
Enable Server Authentication : select the item, if you want to share
your storage with user level security which requires user name and
password to login. If you clear the item, your storage will be shared
without security.
Ś
Allow Anonymous Login : select the item, if you want to allow the user
ņ
anonymous
Ň
to login your FTP server with read-only permission and
the Server will not check the password. If you clear the item, your FTP
server will not support anonymous login function.
C.Storage Access Mode: To use FTP and SMB/CIFS to access storage,
please set the storage access mode to the server mode. For the NetUSB
mode, please refer to chapter 9.