95
Chapter16 The Init Button
16
16
The Init Button
The Init button is used for maintenance: Simultaneously press
Init
button
and turn on (by plugging in the power adaptor) the Server until USB1 and
USB2 LED indicators simultaneously blink. After that, the Server will do
the following tasks:
A.Perform a Factory Default of the MFP server, which will restore most of
the parameters and settings to factory default values,
B.Perform a TFTP server. You can upgrade new firmware using any TFTP
client tool.
Note:After performing the tasks mentioned above, you have to plug off the
power adaptor and then plug in the power adaptor to restart the Server.
Summary of Contents for mini-mfp
