Planex mini-mfp User Manual Download Page 86

Page: 86 / 101

Mini-MFP

Enable SANE (Scanner Access Now Easy) Server: select or clear

Enable SANE Server

support. It is enabled in Factory Default and users

may set the TCP port as follows:

-SANE Port: set SANE server's TCP port (default: 6566)

Enable UPnP (Universal Plug and Play): select or clear

Enable UPnP

support. It is enabled in Factory Default.

Storage Access Mode

1.Server Mode: In this mode, you can access the USB storage via FTP

or SMB/CIFS protocols. Only FAT16/32 file format is supported in this

mode. This is the default mode.

2.NetUSB Mode: In this mode, you can access the USB storage using

NetUSB technology. In this mode, FAT16/32 and NTFS file formats are

supported, but only one user is allowed to access the storage at the same

time. Please refer to chapter 9 for the details about NetUSB technology.

Summary of Contents for mini-mfp





































































































Search results

Summary of Contents for mini-mfp

Reviews:

Related manuals for mini-mfp

Brands by name

Popular brands

Planex mini-mfp, User Manual

Search results

Summary of Contents for mini-mfp

Reviews:

Related manuals for mini-mfp

Brands by name

Popular brands