Planex mini-mfp User Manual Download

Page: 94 / 101

Mini-MFP

4.Click

Factory Default

5.Click

Yes

to confirm

14.3 Using Init Button

Plug in the power adaptor while pressing the Init button until LED

indicators of Power, USB1 and USB2 blink. After that, plug off the power

adaptor and then plug in the power adapter again to restart the Server.

Finally, the Server will operate using the Factory Default values.

14.4 Default Parameters List

Host Information

Comment (Optional):

PCI USB 2.0 MFP and File Server

Host Name

: Mini-MFP

Workgroup

: WORKGROUP

Code Page of File Server

: Western European

TCP/IP

Automatically get IP by DHCP

: Enabled

Manual DNS

: None (Disabled).

Static IP

: Disabled

IP Address

: 192.168.1.200

Subnet Mask

: 255.255.255.0

Default Gateway

: none

DNS Server

: none

Summary of Contents for mini-mfp





































































































Search results

Summary of Contents for mini-mfp

Reviews:

Related manuals for mini-mfp

Brands by name

Popular brands

Planex mini-mfp, User Manual

Search results

Summary of Contents for mini-mfp

Reviews:

Related manuals for mini-mfp

Brands by name

Popular brands