Planex mini-mfp, User Manual

Page: 20 / 101

3
12
Mini-MFP
6.Click the button corresponding to your choice of IP setting methods
(static or dynamic using DHCP). When assigning a static IP address you
also have to define Subnet Mask and Default Gateway.
7.Click Submit to save your settings. And the Server will reboot. You have
now finished the procedure of setting the IP address.
3.3 Naming Your USB Devices
3.3.1 Printer Names
The system will set the printer model names as the printer names. The
system only allows a 12-character long USB device name. For example,
the printer model name is
ņ
Photosmart 2600 series
Ň
and then the printer
name will be set as
ņ
Photosmart 2
Ň
.
If system cannot get the printer model (For example, you use some parallel
printers and use Parallel-to-USB cables to connect the printers), the default
printer names are set as: USB1_Printer and USB2_Printer with respect to
USB1 port and USB2 port.
3.3.2 Storage Names
The local drives of the two storages in USB1 port and USB2 port are
named as USBx_DyPz, where USBx represents the USBx port, Dy
represents the y-th Disk (in particular to card reader plugging in multiple
cards) and Pz represents the z-th partition.