Planex mini-mfp, User Manual

Page: 29 / 101

21
4
Chapter4 Print Server in Windows
4.4.3 Using Standard Windows Method for Raw TCP
Printing
Windows Platform : Windows 2000, XP and 2003
1.Open Printers and Faxes
2.Right-click the printer for which you want to change settings, and then
click Properties
3.Clear Enable bidirectional support and click Add port , and then click
Standard TCP/IP Port from the dropdown and click New port .
4.The " Add Standard TCP/IP Printer Port Wizard " will pop up and
click Next .
5.In the Printer Name or IP Address box, enter the Host Name of the
Server (default: Mini-MFP) or IP address of the Server. In the Port
Name box, enter USB1_RAW or USB2_RAW for printer connected to
USB1 port and USB2 port, respectively.
œ
If your Server is running on a different LAN than your Windows PC
such Internet PC, you must enter the Server's IP address in Printer Name
or IP Address box.
6.Click Next .
7.Click Custom/settings .
8.The click Settings and confirm that the settings are as below. The default
Port Number values are 9100, 9101 for USB port 1 and USB port 2,
respectively. Refer to the Server
Ņ
s web pages or the Control Center, you
can get exact values. Click OK .