67
Chapter9 The NetUSB Technology
9
For printers, users can mix print jobs with traditional printing protocols,
such as LPR or SMB or IPP, and with the NetUSB printing, as long as
the printer is in
ņ
unlink
Ň
state (that is, no PC get the ownership of that
printer.) when a print job with traditional protocols occurs. Similarly, for
scanners, users can mix scan jobs with
ņ
Network Scanner
Ň
described in
Chapter 7 and with the NetUSB scanning, as long as the scanner is in
ņ
unlink
Ň
state when a user uses
ņ
Network Scanner
Ň
to scan. However,
for USB storage, if the storage access mode is in NetUSB mode, users can
only use NetUSB technology to access storage. On the other hand, if the
storage access mode is in server mode, users can only use FTP or SMB to
access storage.
9.3 How to Use
9.3.1 Remote Installation
Here we will describe how to use the NetUSB technology to do
ņ
remote
installation
Ň
for a USB device. Before using the NetUSB technology,
you must first make sure that your PC can access Mini-MFP via TCP/IP.
The simplest way to do this is using
ņ
Control Center
Ň
to search for all of
Mini-MFPs on the network and change its IP address to be the same subnet
as your PC. If the MFP server and your PC are not in the same TCP/IP
subnet, Control Center will show the MFP server in green, as the following
figure. You must change the IP address (or using DHCP) of the MFP server
so that the MFP server and your PC are in the same subnet. Control Center
will show these MFP servers in blue, meaning you can safely access these
MFP servers by the NetUSB technology.
Summary of Contents for mini-mfp
