56
GEO:CS1
SUPPORT
E-PORTAL
E-portal is a PC application that lets you connect to your CS1 via a USB
cable. Amongst other things you can use E-portal to:
1
Upgrade the CS1 firmware.
2
Change the start-up splash screen.
3
Modify control parameters.
E-portal can be downloaded from the Planet Eclipse website (see below).
Requirements
Monitor Resolution - 1024x768 or higher
1GHz processor
1Gb RAM
Microsoft
®
Windows
®
7 / Windows® 8 / Windows® 10
1
10Mb of storage space
A USB 2.0 Type A - Micro B
2
cable is required to connect the CS1 to a
PC. This cable is not supplied with the CS1 but is available from any good
electrical retailer.
1
Microsoft and Windows are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
2
This is the older, 5 pin Micro B connector NOT the newer USB 3.0 Micro B connector.
Download E-Portal from our marker support page below:
PLANETECLIPSE.COM/EPORTAL
WARNING!
Ensure the CS1 is fully unloaded before connecting to a PC. The
air system and
loader should be disconnected and any paintballs should be removed from the
breech of the marker.
WARNING
Summary of Contents for GEO CS1
Page 1: ...01 GEO CS1 PLANET ECLIPSE GEO CS1 USER MANUAL ENGLISH 68 CAL ...
Page 5: ...05 GEO CS1 ...
Page 6: ...FIG 1 06 GEO CS1 QUICK START SETTING UP THE CS1 F C B E D H I K J A G HEX 5 32 1 2 2 5 3 4 6 ...
Page 14: ...FIG 1 14 GEO CS1 QUICK START UNLOADING THE CS1 D G H C A F B E HEX 5 32 2 1 6 5 3 4 ...