FIG-1
FIG-3
FIG-2
FIG-4
30
GEO:CS1
FIG-1 - BACKLIGHT PARAMETER
This sets the time that the
LCD backlight is illuminated for after a push-button is pressed.
This parameter can be set between 00.00 and 00.20 seconds. At 00.00 no
backlight will be present.
FIG-2 - RED LEVEL PARAMETER
This sets the percentage of red in the
LCD backlight colour.
This parameter can be set between 0% and 100% increments.
FIG-3 - GRN LEVEL PARAMETER
This sets the percentage of green in the
LCD backlight colour.
This parameter can be set between 0% and 100% increments.
FIG-4 - BLU LEVEL PARAMETER
This sets the percentage of blue in the
LCD backlight colour.
This parameter can be set between 0% and 100% increments.
ELECTRONICS
USER INTERFACE PARAMETERS
Summary of Contents for GEO CS1
Page 1: ...01 GEO CS1 PLANET ECLIPSE GEO CS1 USER MANUAL ENGLISH 68 CAL ...
Page 5: ...05 GEO CS1 ...
Page 6: ...FIG 1 06 GEO CS1 QUICK START SETTING UP THE CS1 F C B E D H I K J A G HEX 5 32 1 2 2 5 3 4 6 ...
Page 14: ...FIG 1 14 GEO CS1 QUICK START UNLOADING THE CS1 D G H C A F B E HEX 5 32 2 1 6 5 3 4 ...