FIG-1
10
GEO:CS1
QUICK START
VELOCITY ADJUSTMENT
FIG-1
The CS1
velocity adjustment screw is accessed from the underside of
the
POPS bonnet.
With the
POPS bonnet in the rear (engaged) position, insert a 1/8
hex key
A
into the velocity adjuster screw
B
to adjust the velocity
of the CS1.
1
Turn the hex key clockwise to reduce velocity.
2
Turn the hex key counter-clockwise to increase velocity.
3
Fire two clearing shots after each velocity adjustment for an
accurate velocity reading.
1
DO NOT
turn the adjuster screw in too far. This will prevent the
CS1 from firing.
WARNING!
DO NOT exceed 300FPS.
Always wear correct protective equipment when firing your marker.
NEVER leave the CS1 gassed up when unloading.
NEVER point your marker in the direction of other people when not on the field.
WARNING
–
+
1
B
A
HEX
1/8
Summary of Contents for GEO CS1
Page 1: ...01 GEO CS1 PLANET ECLIPSE GEO CS1 USER MANUAL ENGLISH 68 CAL ...
Page 5: ...05 GEO CS1 ...
Page 6: ...FIG 1 06 GEO CS1 QUICK START SETTING UP THE CS1 F C B E D H I K J A G HEX 5 32 1 2 2 5 3 4 6 ...
Page 14: ...FIG 1 14 GEO CS1 QUICK START UNLOADING THE CS1 D G H C A F B E HEX 5 32 2 1 6 5 3 4 ...